Sharp PC-W100 Series, Руководство по эксплуатации

Страница: 90 / 100

Appendixes A-5
Recreating the Suspend-to-Disk Partition
Carefully follow the steps below to create a new suspend-to-disk partition. Since
creating a new suspend-to-disk partition destroys all the data on the hard disk, you
must first backup all the data on the hard disk drive.
The entire procedure includes the following steps:
•
Backing up all the data of the hard disk
•
Deleting the current suspend-to-disk partition
•
Deleting the partition that contains current files
•
Creating the new suspend-to-disk partition
•
Restoring the system
You should prepare the following items:
•
Windows 95 Setup Disks.
•
Windows 95 Startup Disk.
•
Two or more boxes of 1.44 MB diskettes, depending on how much you have used
your hard disk.
Backing up all the data of the hard disk
1. From the Start menu, select Help .
2. Open the topic on Backup.
3. Start Backup from the Help windows.
Deleting the current suspend-to-disk partition
1. Insert the Windows 95 Startup Disk into the floppy disk drive.
2. Reboot the notebook.
3. Press F2 when the message Press <F2> to enter SETUP appears.
4. On the Main page of Setup Utility, set Boot Sequence to A: Then C: .
5. On the Security page, set Hard disk boot sector to Normal .
6. Press the Esc key and select Save Changes & Exit .
7. When the system restarts, the following message appears:
Do you want to set up Windows 95?
(To change the suspend-to-disk partition, select N.)
[Y/N]