8
8-2
Entering and Exiting the Setup Utility
1.
Turn on the computer.
2.
When
Press <F2> to enter System Configuration Utility
appears, press
F2
.
3.
Change the desired settings.
4.
Click
Exit
to select the
Exit
menu.
5.
Select one of the exit methods, and press
Enter
.
6.
Confirm the message and press
Enter
again. The system restarts.
To turn off the computer when the Setup Utility is open, slide the power
switch.
Using the Setup Utility
To navigate through the different menus, you can use the following keys:
Moves the cursor from one menu to another.
Moves the cursor from one item to another in a menu.
Space bar
Increases the numeric value or enable/disable the item in the
sub menu.
Decreases the numeric value or changes an item to the
previous value in the sub menu.
When a sub-menu is open, this key closes the sub-menu.
Displays sub menu. Enable/disable the selected item.