manualshive.com logo in svg

Sharp Notevision XG-NV6XU, Руководство по эксплуатации

Sharp Notevision XG-NV6XU - высококачественный проектор для качественного воспроизведения изображений. Для правильной настройки и использования, обязательно ознакомьтесь с Operation Manual. Скачайте его бесплатно с manualshive.com, чтобы получить полные инструкции по эксплуатации этого устройства.

Поделиться
Скачать
background image

E-48

Maintenance &

Tr

oubleshooting

Replacing the Projection Lamp

4

6

Remove the lamp
cage.

5

Replace the lamp cage
(after changing the lamp).

1

3

Turn off the power.

2

Disconnect the power
cord.

Unplug the power cord from the
AC socket.

Slide the lamp cage
cover out.

Slide the lamp cage
cover in.

Slide the lamp cage cover in the
direction of the arrow. Then
fasten the user service screw.

Remove the securing screws
from the lamp cage. Hold the
lamp cage by the handle and
pull it towards you.

Turn over the projector and un-
fasten the user service screw
that secures the lamp cage
cover. Then slide the cover in the
direction of the arrow.

Press 

POWER OFF

. Wait until

the cooling fan stops.

Press the lamp cage firmly into
the lamp cage compartment.
Fasten the securing screws.

It is recommended that the lamp be replaced after approximately 2,000 cumulative hours of use or when you
notice a significant deterioration of the picture and color quality. Carefully change the lamp by following the steps
below.
If the new lamp does not light after replacement, take your projector to the nearest Authorized Sharp Industrial
LCD Products Dealer or Service Center for repair. Purchase a replacement lamp unit (lamp/cage module) of the
current type BQC-XGNV6XU/1 from your nearest Authorized Sharp Industrial LCD Products Dealer or Service
Center. Then carefully change the lamp by following the instructions below. If you wish, you may have the lamp
replaced at your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center.

IMPORTANT NOTE TO U.S. CUSTOMERS:

The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this
projector under warranty, including lamp replacement, must be obtained through an Authorized Sharp Industrial LCD
Products Dealer or Service Center. For the name of the nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center, please call toll-free: 1-800-BE-SHARP (1-800-237-4277).   

                                                              U.S.A. ONLY

Removing and installing the lamp unit

CAUTION

• Do not remove the lamp cage directly after operation of the projector. The lamp may be extremely hot. Wait at least one

hour after the power cord is disconnected to allow the surface of the lamp cage to fully cool before removing the lamp
cage.

• Be sure to remove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of

the projector.

• To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.
• Before or after replacing the lamp, be sure to clean the air filters. See page 46 for cleaning the air filters.

User service screw

or

User service screw

Securing
screws

Securing

screw

Содержание Notevision XG-NV6XU



































































Отзывы:

Нет отзывов

Похожие инструкции для Notevision XG-NV6XU

NEC NP-PX700W Command Manual preview
NP-PX700W
Бренд: NEC Страницы: 60
NEC NP-PX700W Technical Data Sheet preview
NP-PX700W
Бренд: NEC Страницы: 2
NEC MultiSync LT280 Technical Specification preview
MultiSync LT280
Бренд: NEC Страницы: 2
Patton electronics 533 User Manual preview
533
Бренд: Patton electronics Страницы: 3
Draper Ambassador 220V Installation & Operating Instructions preview
Ambassador 220V
Бренд: Draper Страницы: 2
ViewSonic PJD5233 Specification preview
PJD5233
Бренд: ViewSonic Страницы: 2
BOXLIGHT CP322ia User Manual preview
CP322ia
Бренд: BOXLIGHT Страницы: 55
Barco F70-W8 User Manual preview
F70-W8
Бренд: Barco Страницы: 74
Eiki EK-351WST Owner'S Manual preview
EK-351WST
Бренд: Eiki Страницы: 84
BenQ PB2120 - SVGA DLP Projector (Italian) User Manual preview
PB2120 - SVGA DLP Projector
Бренд: BenQ Страницы: 34
Hitachi CP-RX70(M1-20EN) Service Manual preview
CP-RX70(M1-20EN)
Бренд: Hitachi Страницы: 76
Siemens 5SD7444-1 Operating Instructions Manual preview
5SD7444-1
Бренд: Siemens Страницы: 6
Siemens 5SD7418-2 Quick Start Manual preview
5SD7418-2
Бренд: Siemens Страницы: 4
Siemens 3TX7462-3 Operating Instructions preview
3TX7462-3
Бренд: Siemens Страницы: 4
Siemens 5SD7442-1 Operating Instructions Manual preview
5SD7442-1
Бренд: Siemens Страницы: 6
Siemens 3TX7402-3A Operating Instructions preview
3TX7402-3A
Бренд: Siemens Страницы: 5
Siemens 5SD7422-0 Operating Instructions Manual preview
5SD7422-0
Бренд: Siemens Страницы: 7
Siemens 5SD7434-1 Operating Instructions Manual preview
5SD7434-1
Бренд: Siemens Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды