Sharp Notevision PG-M25X, Руководство по обслуживанию

Страница: 24 / 182

24
PG-M25X
No. Adjustment Items Adjustment Conditions Adjustment Procedures
22 Confirmation of
color-related
operation 1. Receive the color bar signal. 1. Select L1 in the process mode.
Check the performance of color and
tint.
23 Confirmation of
picture-related
operation 1. Receive monoscope pattern signal. 1. Select L2 in the process mode.
Check Picture, Brightness and Sharp-
ness.
24 Confirmation of
RGB 1. Receive the RGB signal. 1. Select L4 on the process mode.
Check Picture, Brightness, Red, Blue,
Clock, Phase, H-POS and V-POS.
25 Confirmation of
off-timer operation 1. Select OFF in the process mode.
Confirm that the off-timer starts with
5-minute display, counts 1 minute for
1 second, and turns off when 0 minute
is displayed.
26 Confirmation of
thermistor opera-
tion 1. Heat the thermistor by dryer. 1. Confirm that the temperature is dis-
played.
27 Automatic sync
operation 1. Receive the phase checking pattern
signal.
1. Confirm that Clock, Phase, H-POS
and V-POS can be automatically
adjusted in the VGA/S-VGA/XGA
mode.
28 Gyro remote
controller perfor-
mance checking Make sure the Gyro remote controller
functions as specified.
29 PC card perfor-
mance checking 1. Insert the wireless LAN card into the
PC card slot.
2. Then insert the memory card with
the test pattern images into the PC
card slot.
1. Make sure the image can be prop-
erly transferred.
2. Make sure the image can be prop-
erly displayed.
30 Factory settings 1. Receive the phase checking pattern
signal.
1. Make the following settings.
2. Register the Gyro remote controller
that is shipped together.
Process
adjustment
S4
Remote control
setting
Factory setting 4"
21 Confirmation and
re-adjustment of
white balance 1. The adjusting conditions for each
item are as follows:
For RGB input, see Item 11
For SRGB input, see Item 13
For video input, see Item 14
For DVT input, see Item 12
Confirm that there is no deviation in white
balance from that of the monitoring
equipment.
For readjustment, proceed in the order
of RGB input, video input and DTV in-
put.