Sharp MX-M260, Руководство по обслуживанию, Страница: 51 / 137

MX-M260/M310/M260N/M310N SIMULATION 6 - 18
Detection size when 8.5” x 13” document/paper is used.
A4/LT (8.5” x 11”) detection enable/disable setup
In the inch series, Letter is detected as A4; in the AB series, A4 is
detected as Letter.
Detection size when A4/LT (8.5” x 11”) document/paper is used.
Operation/procedure
Select the mode corresponding to the auditor specification mode with
the 10-key.
When “1: VENDOR (Coin vendor mode)” is set, the following three
items of key operation setting are changed.
1) Set the LCD backlight change inhibit to “1: OFF (Enable).”
2) When SIM 26-6 destination setting is set to “0: Japan,” duplex copy
inhibit setting must be set to “0: ON (Inhibit).”
3) Set the sort automatic selection to “0: OFF (Disable).”
Operation/procedure
Used to set the count up number (1 or 2) when an A3/WLT paper
passes through.
For the drum counter and the developer counter, double count is
employed unconditionally.
(Target counter selection)
Used to set the count up number of the selected counter.
Operation/procedure
Select the destination with the 10-key.
By changing the destination, some other setting items may be changed.
Employed
unit
Destina
tion
Document
size
Set value
0
(Invalid)
1
(Valid)
Docu
ment
Document
table/
RSPF
AB
series
FC
(8.5” x 13”)
B4
FC
(8.5” x 13”)
LG
(8.5” x 14”)
B4
FC
(8.5” x 13”)
B4 B4
FC
(8.5” x 13”)
Inch
series
FC
(8.5” x 13”)
LG
(8.5” x 14”)
FC
(8.5” x 13”)
LG
(8.5” x 14”)
LG
(8.5” x 14”)
FC
(8.5” x 13”)
B4
WLT
(11” x 17”)
WLT
(11” x 17”)
Paper
Machine
paper feed
tray All
destina
tions
– Set with key operations.
Manual
paper feed
tray
AB
series
FC
(8.5” x 13”)
LG
(8.5” x 14”)
FC
(8.5” x 13”)
LG
(8.5” x 14”)
LG
(8.5” x 14”)
FC
(8.5” x 13”)
B4 B4 B4
Inch
series
FC
(8.5” x 13”)
LG
(8.5” x 14”)
FC
(8.5” x 13”)
LG
(8.5” x 14”)
LG
(8.5” x 14”)
FC
(8.5” x 13”)
B4 B4 B4
Set value Setup Remarks
0 Detection invalid Default
1 Detection valid
Employed
unit
Destina
tion
Document
size
Set value
0
(Invalid)
1
(Valid)
Docu
ment
Document
table/
RSPF
AB
series
A4 A4
LT
(8.5” x 11”)
LT
(8.5” x 11”)
A4
LT
(8.5” x 11”)
Inch
series
A4
LT
(8.5” x 11”)
A4
LT
(8.5” x 11”)
LT
(8.5” x 11”)
A4
Paper
Machine
paper feed
tray All
destina
tions
–
Set with key
operations.
Manual
paper feed
tray All
destina
tions
–
Regardless of the
simulation setup.
26-3
Purpose Setting
Function
(Purpose)
Used to set the specifications of the auditor.
Setting must be made depending on the use condition
of the auditor.
Section Auditor
Item Specifications
Item Content
Setting
range
Default
0 P10 Built-in auditor mode
0-2 0 1 VENDOR Coin vendor mode
2 OTHER Others
26-5
Purpose Setting
Function
(Purpose) Used to set the count mode of the total counter and the
maintenance counter.
Item Specifications Counter
Item Content
1 TOTAL COUNTER Total counter
2 MAINTENANCE COUNTER Maintenance counter
Item Content Setting range Default
1 SINGLE COUNT Single count
1-2 2
2 DOUBLE COUNT Double count
26-6
Purpose Setting
Function
(Purpose) Used to set the specifications depending on the
destination.
Item Specifications Destination
Item Content
Setting
range
Default
0 JAPAN Japan
0-14 0
1 SEC SEC
2 SECL SECL
3 SEEG SEEG
4 SUK SUK
5 SCA SCA
6 SEF SEF
7 INEG EX inch series
8 ABEG EX AB series
9 INEF EX inch series (FC)
10 ABEF EX AB series (FC)
11 CHINESE China
12 TAIWAN Taiwan AB
13 SEEG2 SEEG2
14 TAIWAN2 Taiwan China