Sharp MX-M1100 Скачать руководство пользователя страница 52

Страница: 52 / 194

To change the file name, touch the [File
Name] key.

The file name is entered in the same way as the subject.

To change the body text, touch the
[Body Text] key.

Enter the body text and touch the [OK]
key.

• To select a pre-set message previously stored in the Web

page, touch the [Pre-Set Select] key.

• To directly enter the message, touch the [Edit] key.

• 1800 characters can be entered. (A line break counts as one character.)

• To clear all entered text, touch the [Clear All] key. This key clears not only the selected line but also the entire

message.

• Each line of the entered text can be selected with the

keys. To edit the selected line, touch the [Edit] key.

The text entry screen will appear with the selected text entered.

Send

Settings

Sub

ect

File

Name

Body

Text

Sub:

Schedule

coordination

meeting

Sub:

Schedule

coordination

meeting

Material

planning

meeting

Send

Settings

Sub

ect

File

Name

Body

Text

Body

Entry

Thank

you

your

continuous

support.

have

attached

scanned

data

which

you

have

requested.

Clear

All

Edit

Pre-Set

Select

Содержание MX-M1100



































































































































































































Результаты поиска

Содержание MX-M1100

Отзывы:

Sharp MX-M1100, Руководство пользователя программного обеспечения, Страница: 52 / 194

Результаты поиска

Содержание MX-M1100

Отзывы: