Sharp MX 3070 Скачать руководство пользователя

Страница: 17 / 56

General Problems

PRINTING TAKES PLACE ON THE WRONG SIDE

OF THE PAPER

Check

Solution

Is the paper loaded with the print side
facing in the correct direction?

■

Make sure that the print side of paper is facing in the correct direction.
• Trays 1 to 4:

Place the paper with the print side face up.*

• Bypass Tray :

Place the paper with the print side face down.*

* When the paper type is "Pre-Printed" or "Letter Head", load the paper in the
opposite way.

(Except when [Disabling of Duplex] is enabled in the setting mode
(administrator).

For information about the setting mode, consult your administrator.)

A COVER OR INSERT IS NOT PRINTED ON THE

SPECIFIED PAPER

Check

Solution

Has the paper type been set
correctly?

■

Set the correct paper type for the tray that contains the paper specified for the
cover or insert.

If the paper type set for the cover or insert is not the same as the paper type set
for the tray, paper will be fed from a different tray.



"Setting mode"

→

[System Settings]

→

[Common Settings]

→

[Paper Settings]

→

[Tray Settings/ Paper Settings]

→

[Paper Tray Settings]

→

[Tray Registration]

THE CONNECTED USB DEVICE CANNOT BE

USED

Check

Solution

Is the USB device compatible with the
machine?

■

Ask your dealer if the device is compatible with the machine.

USB devices that are not compatible with the machine cannot be used.

Is the connected USB device
recognized correctly?

■

When a USB device is connected to the machine and correctly recognized, an
icon (

) will appear at the top of the touch panel. If it is not recognized, connect

it once again.

Is the format of the USB memory
device FAT32?

■

Check the file format of the USB memory device.

If the format of the USB memory device is other than FAT32, use your PC to
change the format to FAT32.

Содержание MX 3070

























































Результаты поиска

Содержание MX 3070

Отзывы:

Похожие инструкции для MX 3070

Бренды по названию

Популярные бренды

Sharp MX 3070, Руководство по устранению неисправностей

Результаты поиска

Содержание MX 3070

Отзывы:

Похожие инструкции для MX 3070

Бренды по названию

Популярные бренды