– 8 –
MD-MT88H/99H
Error Messages
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
BATT EMPTY
●
The battery has run down.
BLANK MD
●
Nothing is recorded.
(Replace the disc with a recorded disc.)
Can't COPY
●
You tried to record from a copy prohib-
ited MiniDisc.
●
You tried to record signals other than
music (such as data).
(Record using the analogue cable.)
Can't EDIT
●
A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can't READ (*)
●
The disc data cannot be read because
the disc or unit is damaged.
(Reload the Minidisc or replace it with an-
other one.)
Can't REC
●
Recording cannot be performed cor-
rectly due to vibration or shock.
ERROR MES-
SAGES
MEANING
Can'tSTAMP
●
Stamp function does not work.
(Check the number of tracks.)
Can'tWRITE
●
Cannot save the TOC information cor-
rectly to a MiniDisc.
DEFECT
●
The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
DISC FULL
●
The disc is out of recording space.
Er-MD (**)
●
The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
HOLD
●
The unit is in the hold mode.
LOCKED
●
You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power and remove the Mini-
Disc.)
NO DISC
●
A disc has not been loaded.
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
NO SIGNAL
●
Poor connection of the digital cable.
●
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
●
The input signal has improper sam-
pling frequency.
NOT PLAY
●
You tried to play back a track that can-
not be played with this equipment.
PLAY MD
●
You recorded on a playback-only disc.
POWER ?
●
Improper power is being supplied.
PROTECTED
●
The write protection tab of a MiniDisc
is set to the protected position.
●
You tried to record on a playback-only
disc.
SORRY
●
Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a whilst and try the operation
again.)
ERROR MES-
SAGES
MEANING
TEMP OVER
●
The temperature is too high.
(Turn off the power, and wait for a whilst.)
TOC FORM
(**)
●
There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
TOC FULL
●
There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect
●
The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
? DISC
●
A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
●
There is an error in the signal recorded
on the disc.
