Sharp MD-MT285E, Руководство по эксплуатации

Страница: 36 / 52

03/7/15 MD_MT285E_5.fm
36
MD-MT285E
MD-MT285E TINSE0539AWZZ
T
INSE0
5
3
9
A
W
ZZ
(
U
K)
Ad
v
a
n
c
e
d
Fe
at
ur
es
-T
it
li
n
g
a
M
in
iD
is
c
-
Titling a MiniDisc (continued)
!
To add characters
!
Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
1
Put the unit in the character input mode.
(Perform steps 1 - 5 on page 34.)
2
Press the VOL. + or VOL. - button to move
the cursor to the character before which you
want to add a new character.
3
Select the character to add.
(Perform steps 6 - 8 on page 34.)
4
Press and hold down the MENU/ENTER but-
ton for 2 seconds or more.
"
"TOC" will be displayed. To write the updated con-
tents to the MiniDisc, press the :OFF/HOLD but-
ton.
"
You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the re-
corded contents have been updated.
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same or-
der as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)