Sharp MD-MT190H, Руководство по эксплуатации

Страница: 22 / 53

01/10/29 MD-MT190H(SEEG)_3.fm
E-15
MD-MT190H
ENGLISH
B
asic Opera
ti
o
n
-Pla
y
b
a
c
k
/Hold F
unc
ti
on-
Playback (continued)
Bass control
Each time the BASS button is pressed, the tone will be
switched as follows.
Notes:
You cannot change the bass setting whilst selecting
menus.
Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your usual
expectations of noise, high volume may damage your
hearing.
The sound escaping from your earphones may annoy
people around you. In particularly crowded places (such
as on trains or buses), reduce the volume.
Hold Function
The present operation condition can be kept even if other
buttons are accidentally pressed in a place such as a
crowded train.
If the battery is inserted or the AC adaptor is connected, you
can set this function even when the power is turned off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or more
whilst the unit is in the hold mode.
To cancel the hold mode
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
BASS 1 Emphasised slightly.
BASS 2 Emphasised more.
BASS 3 Emphasised fully.
BASS OFF Cancelled.
Press the HOLD button for 2 seconds or more.
Hold Release
Main unit
If the hold function is active whilst the power is turned off,
the power cannot be turned on by mistake and the battery
will not be drained.
Hold
Orange mark
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Remote control unit