Sharp MD-MS702MK, Руководство по обслуживанию

Страница: 4 / 32

MD-MS702MK
– 4 –
OPERATION MANUAL
■
Rechargeable battery power
When the rechargeable battery is used for the first time or when you want to use it after a long period of non use, be sure to charge it fully.
1
Open the rechargeable battery com- partment cover.
2
Insert the rechargeable battery.
●
Insert the side with the arrow first.
3
Close the rechargeable battery com- partment cover.
4
Plug the AC adaptor into the AC outlet, and then insert the plug on the AC adaptor cord into the DC IN 5V jack.
5
Press the
■
/:OFF button twice to begin
charging.
●
“
”
w
ill
ap
pe
ar
, an
d t
h
e
ba
tt
e
ry w
ill
begin charging.
●
Battery charging will be complete in 3.0 hour
s.
W
hen t
he char
ging
is
com
-
plet
e,
“
”
w
ill
go
out
.
AC 120V, 60 Hz To an AC outlet
POWER SOURCE
Notes:
●
After charging is complete, the AC adaptor may be left connected. (For ex- ample, when charging at night)
●
The battery will not be charged when- ever the power to the main unit is turned on.
●
If the AC adaptor is removed from the main unit or from the AC outlet while ch
ar
g
ing
, “
”
w
ill
no
t di
sa
pp
ea
r f
o
r
about 1 minute. This is normal.
●
Do not force open the rechargeable battery door too far.
●
Do not attach the optionally available battery case when charging the internal battery.
This unit can be used with 4 different power sources: a rechargeable battery, an AC adaptor, an optionally available battery case (AD-M70BC), and an optionally available car adaptor (AD-CA20X).
1 2
5
4
:OFF
5V
DC IN
Mark
To the DC IN 5V jack
Insert securely, all the way in.
■
Checking the remaining amount of battery charge
The remaining amount of battery charge is sh
ow
n
by
t
h
e
ba
tt
e
ry
in
dic
at
or
(
) du
r-
ing operation. < How to read the battery indicator >
●
When the battery is completely dis- charged, the whole battery indicator will flash. Recharge the battery or replace the alkaline batteries with new ones.
●
When the battery has completely run out, “BATT EMPTY” (main unit) and “Lo BATT” (remote control unit) will appear. The power will be disconnected auto- matically.
Notes:
●
When the AC adaptor included with this unit or an optionally available car adap- tor is used, the battery indicator will not be shown.
●
The number of bars shown in the bat- tery indicator may increase or de- crease, depending on the operation being performed. This is normal.
●
When the rechargeable battery and the alkaline batteries are used at the same time, the rechargeable battery is used first, and then the alkaline batteries. Since the battery indicator shows the remaining amount of the particular bat- tery being used, the number of bars will increase when the unit switches to the alkaline batteries.
CONVENIENT OPERATION FEATURES
Battery indicator
Charging is needed.
When the battery is completely charged
When the battery needs charging, it is impossible to start recording or editing.
RECORDING USING AN OPTIONALLY AVAILABLE DIGITAL CABLE
There are cases where digital recording may be impossible.
In the following cases digital recording is impossible, even if you are using digital cables. When you attempt to make a new digital recording from a track that was digitally recorded on a MiniDisc
●
MiniDiscs are designed so that only first generation digital copies can made, further digital copies are pre- vented by the SCMS (Serial Copy Man- agement System).
Re
c
o
rd
in
g
P
lay
ba
ck
CD player, MD player, etc.
Digitally recorded MiniDisc
Digital cable
Re
c
o
rd
in
g
P
lay
ba
ck
Digital cable
Analog recording is possible.