Sharp LV-Z301D, Руководство по эксплуатации

Страница: 32 / 115

Basic Operations
23
P A U S E
To pause recording
Press the Record Start/Stop button again.
Recording pauses, and the camcorder
enters Recording Standby mode.
To turn the power off
Set the Power switch to OFF without
pressing the Lock button.
Note:
• If the camcorder remains in Recording
Standby mode for more than 5 minutes in
Tape Camera mode, the power will automati-
cally turn off to save battery power and to
protect the tape from being damaged. To
resume recording, set the Power switch to
OFF and then back to
v
. (The camcorder
will make a confirmation sound when it is left
in Recording Standby mode for about 4
minutes.)
Zooming
Available modes:
Tape Camera, Card Camera
Zooming allows you to move visually closer
to or farther from a subject without physi-
cally changing your position.
When using the optical zoom, you can
enlarge the subject up to 10
K
.
Zooming in
Push the Power Zoom control to the T
(telephoto) side to get a close-up view (
1
).
Zooming out
Push the Power Zoom control to the W (wide
angle) side to get a wide field of view (
2
).
• The zoom range indicator shows you the
current zoom setting.
• The zoom speed depends on how far you
push the Power Zoom control.
Notes:
• The camcorder is unable to focus when
zooming in on subjects within 1.5 m.
• See page 33 for how to use the digital zoom.
Zooming in (when you want to centre
attention on the subject)
Zooming out (when you want to include
the surroundings)
W T 3 Z OOM
Power Zoom
control
Zoom range indicator
VL-Z501D/VL-Z301D-E-021-030 03.7.15, 8:37 AM 23