Sharp LC-50U35T, Руководство по обслуживанию

Страница: 13 / 102

LC50/58/65U35T
5 – 5
For the system spec, error"0x11" is always recorded after Factory Reset execution. It is not recorded as problem so that please be careul when you
find out.
- t s u j d a t n i o p - n e v e s 5 6 D r o f r e t e m a r a P e u l a v t n e m t s u j d a R , 4 t n i o P t n e m t s u j d a B W 4
R
O L 1 9
ment
e u l a v t n e m t s u j d a G , 4 t n i o P t n e m t s u j d a B W 4 G O L 2
e u l a v t n e m t s u j d a B , 4 t n i o P t n e m t s u j d a B W 4 B O L 3
e u l a v t n e m t s u j d a R , 5 t n i o P t n e m t s u j d a B W 5 R O L 4
e u l a v t n e m t s u j d a G , 5 t n i o P t n e m t s u j d a B W 5 G O L 5
e u l a v t n e m t s u j d a B , 5 t n i o P t n e m t s u j d a B W 5 B O L 6
e u l a v t n e m t s u j d a R , 6 t n i o P t n e m t s u j d a B W 6 R O L 7
e u l a v t n e m t s u j d a G , 6 t n i o P t n e m t s u j d a B W 6 G O L 8
e u l a v t n e m t s u j d a B , 6 t n i o P t n e m t s u j d a B W 6 B O L 9
10 1 LO 7R WB adjustment Point 7, R adjustment value Parameter for D65 seven-point adjust-
ment
2 LO 7G WB adjustment Point 7, G adjustment value
3 LO 7B WB adjustment Point 7, B adjustment value
11 1 CD MIN Input parameterfor gamma adjustment
2 CD MID1
3 CD MID2
4 CD MID3
5 CD MID4
6 CD MID5
7 CD MID6
8 CD MID7
9 CD MAX
12 1 VAL1 Parameter for gamma adjustment
2 VAL2
3 VAL3
4 VAL4
5 VAL5
6 VAL6
7 VAL7
8 GAMMA ADJ TEMP
13 1 MONITOR TIME OUT
14 1 LCD TEST PATTERN1
2 LCD TEST PATTERN2
3 TV TEST PATTERN
15 1 DUMMY
16 1 USB BACKUP Save the parameter of WB and Gamma
data as USB data file.
2 USB RESTORE Restore the parameter of WB and
Gamma data from USB data file.
17 1 MODEL Set model name.
2 PANEL SIZE Set panel size.
3 VOLUME TYPE Set speaker volume type.
Error Standby Cause
Outline: Communication/Power failure detected by the monitor microprocessor is stored in EEPROM, and last 4 abnormal
can be confirmed in the Process mode A.
Location: Page 1 of the process mode A: MONITOR ERR CAUSE. “0” if there is no error. It is cleared to 0 on the last page of
the process mode A.
Display Error description
0x11 Regular communication time-out ----
0x16 Backlight error Refer to Troubleshooting Table
0x1A Monitor temperature error - Check TV setting environment.
- Check the other monitor (ref No.)
0x1E DET_13V failure Check 13V power line.
0x1F DET_VCORE failure Check CPU core power line.
0x21 DET_POW_T failure Check T-CON or FRC power line.
Page Line Item Description Remarks (adjustment detail, etc.)
4 DESTINATION Set destination.