23
Watching TV
HDMI auto view
Input label
To watch an HDMI equipment image, select“HDMI 1”
or “HDMI 2” using TV/VIDEO on the remote control
unit or on the TV.
You can assign each input source a label as you
prefer.
Press
MENU
and the MENU screen displays.
Press
MENU
and the MENU screen displays.
1
1
Press
c
/
d
to select “Setup”.
Press
c
/
d
to select “Setup”.
2
2
Press
a
/
b
to select “HDMI auto view”, and
then press
ENTER
.
Press
a
/
b
to select “Input label”, and then
press
ENTER
.
3
3
Press
a
/
b
to select the desired item.
Press
a
/
b
to select the desired input source,
and then press
ENTER
.
Press
a
/
b
/
c
/
d
to select a character, and
then press
ENTER
to save.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press
ENTER
.
• You cannot change labels if the input source is
“ATV”or “DTV”.
4
4
5
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
Selected item
Description
Enable/Disable
Set whether or not to use “Wide
mode” based on signal recognition,
including an HDMI signal.
Link operation
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Link operation”, and
then press
ENTER
.
3
Press
a
/
b
to select “On” or “Off ”.
4
Auto wide
The "Auto wide" allows a television to switch
automatically among the different screen formats.
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Auto wide”, and then
press
ENTER
.
3
Press
a
/
b
to select “On” or “Off ”.
4
NOTE
• “Auto wide” is only available in DTV mode.
• The channel switching speed may be slower when "Auto
wide" is turned on.
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no aspect ratio information, the function will not work even
if enabled.
• In case of weak or unstable signals, it is recommended to
turn Auto wide “Off” to avoid signal misjudgment.
4:3 Mode
The 4:3 mode allows you to select between Full and
Normal.
Press
MENU
and the MENU screen displays.
1
Press
a
/
b
to select “4:3 mode”, and then
press
ENTER
.
3
Press
a
/
b
to select “Full” or “Normal”.
4
WSS signal 4:3 screen
4:3 mode “Full”
4:3 mode “Normal”
Selected item
Description
Full
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
Press
c
/
d
to select “Setup”.
2
When the TV is linked with the device which has the
function for linkage setting, TV and the device can be
chain control.
LX360H_en_ID6-201400313.indd 23
2014/3/15 10:12:51
