Sharp LC-40LE830E/RU, Руководство по обслуживанию

Страница: 11 / 92

LC-40/46LE830E, RU/831E, S
2 – 5
[2] OPERATION MANUAL
Attaching the stand unit
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over.
1
Confirm that there are screws with the stand
unit.
For 46 inch models
(four long screws, four middle screws and one
short screw)
For 40 inch models
(three long screws, three middle screws and
one short screw)
2
Attach the supporting post for the stand unit
onto the base using the long screws with a
screwdriver as shown.
Supporting
post
46 inch models 40 inch models
3
Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Soft cushion
46 inch models 40 inch models
4
Insert and tighten middle screws into the holes
on the rear of the TV.
46 inch models 40 inch models
5
Attaching the stand cover.
Insert the stand cover.
Insert and tighten a short screw into the hole
of the stand cover.
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• The TV can be rotated up to 20 degrees to the right and
left.
Preparation