Sharp LC-28HM2, Руководство по обслуживанию

Страница: 26 / 128

26
LC-28HM2
AN-28SP2
<Items executed by ENTER button operation>
The following items are put into actual execution by switching the relevant line display from “OFF” to “ON” and then
pressing the ENTER button.
P6L5 CENT EEP RST S/C ONLY Initializing the center side EEPROM Sharp Corporation control
area (excluding accumulation time and +B ADJ)
P6L6 MONITOR EEP RST Initializing the monitor side EEPROM
P6L7 UPDATE CENTER PROGRAM Starting updating program for center microprocessor
(terminating the process adjustment)
P6L8 UPDATE MONITOR PROGRAM Starting updating program for monitor microprocessor
(terminating the process adjustment)
P7L1 CENTER ACUTIME RESET Resetting center accumulation time
P7L2 MONITOR ACUTIME RESET Resetting monitor accumulation time
P27L1 INDUSTRY INIT Presetting (Presetting is described separately.)
P1L7 LAMP NG CHECK Resetting the times of lamp errors counted
P6L14 I2C DATA Writing in the I
2
C data set separately (For test)
P7L11 NOISE LEVEL Measuring the noise level of N358 video signal (For test)
The following items are put into execution by positioning the cursor on the relevant line and then pressing the
ENTER button.
P5L13 DATA COPY Copying the adjusted data into relevant part in other color
system
<Items executed by adjustment button operation (such as VOL button)>
The following items are executed immediately after switching the relevant line display from “OFF” to “ON”.
»
Additional explanation on some items
P27L1 MIN TO MAX~ Changing the selected item in the sequence of MIN, MEDIUM
and MAX by pressing the adjustment button (such as VOL +/–)
P27L13 RASTER Displaying the single color solid signal in the following
sequence by pressing the adjustment button
Red
→
Green
→
Blue
→
White
→
Black
P27L14 DUTY SELECT Switching the brightness to BRIGHT, MEDIUM or DARK
P27L15 REVERSE MODE Displaying the video reverse in the following sequence by
pressing the adjustment button. The OSD does not appear
during the single color display.
Normal
→
Up/down reverse
→
Right/left reverse
→
→
Up/down & right/left reverse
P27L16 AV IN/OUT Switching video 3 input and monitor output