214
Quick Start Guide
Remote control
Network select buttons
See pages 217 through 219,
82 through 110 for digital
broadcast-related operations.
Power on/off, channel selection, volume control
Select the desired network.
Turn on the TV.
Power on ············
(Active mode)
Turn off the TV.
The power indicator
lights green.
Power off ············
(Standby mode)
The power
indicator
lights red.
Select the desired
favorite channel.
Favorite channel select
/register
• Press to select the user-
registered channel.
( Press the favorite channel
select/register (
お好み選局／
登録
) button, then press the
channel select button. )
• Press to select the desired network
(terrestrial analog [
地上A
], terrestrial
digital [
地上D
], BS, CS).
(* The
地上D
[terrestrial digital select]
button works only after terrestrial
digital broadcasting services are
started in your area and the TV set is
tuned to receive terrestrial digital
broadcasts.)
Channel select buttons
Channel up (
∧
)/down (
∨
) buttons
Select the desired channel.
• Press to select a channel after selecting
the desired network (terrestrial analog [
地
上A
], terrestrial digital [
地上D
], BS, CS)
and media (TV, radio, or data).
• Press to select channels in the network
and media of last selected channel.
Adjust the volume.
３０
The volume indicator will appear on the
TV screen showing the current volume
level with numerals and a bar.
• You can adjust the volume for each input
independently.
Press to temporarily
turn off the sound.
• Press this button again or press
the volume up/down buttons to
return the sound volume to the
previous level.
The main unit’s control section is
available for performing basic
operations.
Input select
step
4
step
3
選局
入力切換
電源
（押・入-切）
音量
1
2
3
4
5
Power cable connection
• This TV communicates with digital TV stations even when it is in the standby mode.
• Do not disconnect the power cable from the wall outlet immediately after it has been plugged in. In rare instances, the main unit’s
built-in memory will be initialized causing timer programs, the PPV program purchase history (unrecoverable), etc. to be erased. If this
happens, perform all necessary settings again.
• Do not unplug the power cable or interrupt the power supply when the TV set is in use. This may damage the data stored in the built-
in memory.
Preset channels
• This TV set is factory preset to receive VHF channels 1 to 12 and BS/CS 110 channels. See pages
51
through
61
if you wish to
receive terrestrial analog UHF broadcasts or change the channel settings.
Note
Note
Note
Basic Operations
