background image

1. Languages

Select your preferred on screen display language.  This will change the language in 
which the menus and associated information is displayed in.  When set up has been 
completed, this can be changed by selecting Menu > Settings > Language

3. Network setup 

You can connect the TV to your broadband router or wire-

less network in order to take advantage of the Smart functions. If you connect the 
TV to your router using an Ethernet cable (recommended) this step will be skipped.  
Follow the on screen prompts to connect to your wireless network. You can set up 
the Network connection later in the network menu.

5. TV Installation – Audio. 

Depending on how you use / install your TV, select the appropriate setting. The sound 
settings on the TV will adjust to suit the type of installation.

6. Default Source

Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the 
other sources is selected, then the set will not tune in at this stage and default to 
that input. If it is required to tune the set in later, this can be achieved by selecting 
Menu > Channels

4

Connecting your set

First time installation

Button layout

4. Environment of Use

Home Mode:

 For normal use, by default it is set to a power saving mode which re-

duces the energy used by up to 25% (by reducing the power to the LED/LCD panel). 
This can be changed in the picture mode settings.

NOTE:

 In Home Mode, the TV will switch itself to the standby mode after 4 hours in 

the event that the buttons on the remote control or TV set are not used.

Store Mode:

 For store display use. The picture is adjusted to optimum settings. The 

store demonstration will appear on the screen automatically after two minutes. 

1

2

3

4

5

6

2. Country Selection 

Select the correct fl ag for the country in which the set will be used in. This will enable 
the set to correctly install the functions applicable in the country of use.

Stop/Eject DVD 

Play/Pause DVD 

Volume up and menu right 

Volume down and menu left 

Programme/Channel up and menu up 

 

Programme/Channel down and menu down

Displays Menu/OSD 

Displays the input source menu 

Standby Power On/Off 

1

2

3

4

5

6

8

7

9

Fitting the stand

1

ST
ANDBY

9

6

8

5

7

4

3

2

1

1. 

 

(fi g.1) 

Attach the stand neck to the rear of the TV set using the 3 x M(4x12) screw. 

(fi g.2)

 Peel off  the protective plastic cover then attach the stand base to the stand neck. 

(fi g.3)

 Secure the base to the neck by using the 4 x ST(4x12) screws pro

vided.

For stand installation, there are two types of screws 
provided as shown below.  To complete the stand 
installation you will require a cross head screw driver.

Place the TV set on a fl at and clean surface with the 
panel facing downwards to avoid damage.

HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION

When securing the self-tapping screw/s into the base of the stand (on fi rst 
installation) the screw/s will be naturally tight as they create a thread in the 
plastic of the stand neck in order to support a TV of this size.

a) Ensure the cross head screw driver tip fi ts correctly into the head of the 
screw and that it is not too big or small.

b) Screw in all screws individually and partially before tightening all of the 
screws fully.

c) If they become very tight try loosening them slightly and then re-tightening 
them once again as this will continue the process of creating the thread for 
the screws.

4 x 

ST (4x12)

3 x 

M (4x12)

2 A

3 x 
M (4x12)

1

1/2

4 x ST (4x12)

1

2

3

Used for attaching the stand neck 
to the TV (fi g.1)

Used for attaching the stand base
to the stand neck (fi g.3)

Installing batteries

2

Sky remote code

If you wish to use your Sky+/HD+ remote to 
operate the TV’s basic functions, you will 
need a Sky remote control (Revision 9 or 
later) and you will need to program it with 
the code 2134.

Insert the batteries supplied into the remote control and press the standby button 
to power on the TV.

If you wish to use your Sky Q remote to 
operate the TV’s basic functions, you will 
need to program it with the code 4170.

 

 

 

 

 

 

Setting up the TV set for the fi rst time

Connectivity

 

1) Connect the TV to your power socket. 

2) If you wish to use the TV to receive Freeview/Saorview channels, 
connect the RF input from the TV to your outdoor Digital TV aerial. 
If you do not wish to receive Freeview/Saorview, skip this step.

3

To receive Freeview channels, in particular Freeview HD 
channels, you will need a Digital TV aerial and be in a good 
Freeview coverage area. You can check coverage for your 
postcode at www.freeview.co.uk.

Please note that any Freeview HD channels found during 
tuning will be placed in channel positions above 100. 
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

* The Ethernet/LAN port is used for Freeview HD services and smart functions.
 

L

B

J

C

D

E

F

H

K

 ETHERNET* 

Network 

connection 

 

HDMI 1 (ARC) 

HDMI input 

 SCART 

SCART 

Input 

 

RF IN 

RF / TV Aerial Input 

 

Optical Digital Audio    Digital Audio output 

 

HDMI 2 

HDMI input 

 

2 x USB 

USB port 

 

Earphone  

Earphone Input 

 

CI CARD IN  

Common Interface module 

 

AV IN 

Audio/Video Input 

 

YPbPr 

HD input (Ypbpr) 

Outdoor Digital 
TV Aerial

1.

2.

A

K

J

A

B

C

D

E

F

G

H

i

ARC

ETHERNET

1

SCART

RF IN

OPTICAL

DIGITAL

AUDIO OUT

USB 

(2.0)

5V 

500mA MAX

2

CI CARD IN

YPbPr IN

AV IN

EARPHONE

G

H

I

J

K

I

UNI - QSG - Sharp - M - SMART models - Foldout 0079.indd   2

UNI - QSG - Sharp - M - SMART models - Foldout 0079.indd   2

17/04/2018   12:34:56

17/04/2018   12:34:56

Отзывы: