31
Viewing an Image from a PC
Use the INPUT 5 (PC) terminal to connect a PC.
$
• The PC input terminals are DDC1/2B-compatible.
• Refer to
P. 21
for a list of PC signals compatible with the System.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD TV set before connecting with
the PC. (See
P. 21
)
• Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to
your PC’s manuals regarding converting to external output.
Connecting a PC
Signal names for 15-pin mini D-sub connecter
15 14 13 12
9
11
10
8
7
6
5
4
3
2
1
P
in
N
o
.
S
ig
n
al n
am
e
P
in
N
o
.
S
ig
n
al n
am
e
P
in
N
o
.
S
ig
n
al n
am
e
R
GND (Ground)
T
Not connected
G
GND (Ground)
Z
SDA
B
GND (Ground)
H
HD
Not connected
+5V
U
VD
CSYNC
GND (Ground)
W
SCL
$
• Pin No. 5 is not used for inputting the signal.
• Pin No. 9 is not connected with the supplied RGB cable.
Displaying an Image from a PC
Connecting the RGB cable
• Connect the RGB cable making sure
WKDWLW¿WVFRUUHFWO\LQWRWKHWHUPLQDO
7KHQ¿UPO\VHFXUHWKHFRQQHFWRUV
by tightening the screws on both
sides of the plug.
To view an image from a PC, perform the following procedure.
Select the INPUT5 mode using
INPUT
on the remote control or the LCD TV set.
(See
P. 16
)
Select the PC input signal. (See
P. 21
)
Adjust the “Auto SYNC.” items if the PC image does not come in clearly. (See
P. 21
)
PC
RGB cable
(commercially available)
To AUDIO
input terminal
To Audio output
terminal
To ANALOG
RGB terminal
To ANALOG RGB
output terminal
ø 3.5 mm stereo minijack cable
(commercially available)
