Sharp LC-20SH1M, Руководство по обслуживанию

Страница: 5 / 74

5
LC-20SH1M
LC-20SH1X
OPERATION MANUAL
P
a
rt
Names of the Main Unit
Controls
NOTE
•
TV/VIDEO
,
CH (
)/(
) (Channel)
,
VOL (–)/(+) (Volume)
and
MENU
on the upper control panel of the main unit have the same
functions as the same buttons on the remote control
Fundamentally, this operation manual provides a description based
on operation
using the remote control.
OPC sensor Remote sensor
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when the "BACKLIGHT"
is
set to "AUTO
(OPC)".
POWER indicator POWER
indicator lights up green when the power is on, and red when in the
standby mode (the indicator will not light when the main power is off).
The screen angle can be tilted backwards between 12 and 30 degrees. (It cannot be set to vertical.) When changing the angle, make sure to hold the stand and adjust the screen to the best viewable angle.
(MAIN
POWER)
Upper control panel
TV//VIDEO
MENU CH (
)/(
)
(Channel)
VOL (–)/(+) (Volume)
12
°
30
°
Ho
w to adjust the angl
e
Adjustab
le range
Speaker
The examples used throughout this manual are based on the LC-20SH1M model.
Terminals
Stand
A
C
INPUT
terminal
Round loc
k
f
o
r K
ensington
Security Standar
d slot
Rear Vie
w
A
UDIO
A
UDIO OUT
INPUT1 INPUT2
L R
L R
S-VIDEO
VIDEO
COMPONENT
P
R
(C
R
)
P
B
(C
B
)
Y
A
UDIO
L R
A
UDIO
Antenna terminal Headphone jac
k
How to Fix the Cables
Pull
the cables connected to each terminal.
Insert the cables into the stand hole and fix the cables.
Stand hole
How to Prevent the LCD TV Set from Falling Over
To prevent the LCD TV set from falling over in case of earthquakes and so on, strap it onto the wall by threading one end of the string through the loop of the stand (
1
) and fastening the LCD TV set with
the string attached to the hook on the wall or the post, etc. (
2
).
(An example of strapping the LCD TV set onto the wall is shown on the right.) •
The string and hook are commercially available.
Stand
2 1