Sharp LC-20S5H Aquos, Руководство по обслуживанию

Страница: 17 / 61

17
LC-20S5H/M/X
2. How to exit Public Mode
There are the following ways to quit the public mode setup screen.
»
Turn off "PUBLIC MODE" in the adjustment process mode. (
✩
)
←
This way alone is not for quitting the setup
screen, but for quitting the mode itself.
»
Turn off the power with the "POWER" key. (
★
)
»
Select "ENTER". (
★
)
»
Move the cursor to "RESET" and press the "FLASHBACK" key. (Back to the normal mode screen)(
✩
)
★
... "PUBLIC MODE" stays on in the adjustment process mode.
✩
... The settings will be back to the factory ones.
3. Public Mode Setting Values
»
With the factory settings made, the public mode settings get initialized. (The adjustment process remains intact.)
4. Public Mode Menu
The guidance is not displayed onscreen.
Setup procedure
»
To move the cursor up and down, use the "cursor UP/DOWN" key (remote controller) and "CH (
ù
)/(
Ù
)" key
(remote controller and set).
»
To change the settings, use the "cursor RIGHT/LEFT" key (remote controller) and "VOL (+)/(–)" key (remote
controller and set).
»
To save new settings, keep the cursor at "Enter" and use the "cursor RIGHT/LEFT" key (remote controller) and
"VOL (+)/(–)" key (remote controller and set).
Public mode
Power on fixed [Variable ]
Maximum volume [ 60 ]
Volume fixed [Variable ]
Volume fixed level [ 20 ]
RC button [Respond ]
Panel button [Respond ]
Menu button [Respond ]
On screen display [Yes ]
Input mode start [Normal ]
Input mode fixed [Variable ]
Sound only mode [No ]
Reset
Enter