![background image](http://html.mh-extra.com/html/sharp/lc-19le520x/lc-19le520x_operation-manual_368852017.webp)
15
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Selected item
Description
H-Position
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
Clock
Adjusts when the image fl ickers with
vertical stripes.
Phase
Adjusts when characters have low contrast
or when the image fl ickers.
NOTE
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, press
ENTER
, press
c
/
d
to select “Yes”, and then press
ENTER
.
• Images may not be displayed properly depending on the
settings and/or input signals.
Input signal
• Some input signals may have to be registered
manually to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1280
g
768
1360
g
768
H
Version up
This function is only for service personnel to use for
software updates.
Option menu (Continued)
H
Audio only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the TV
such as by changing the input source, the Audio only function
is set to “Off”.
H
Game play time
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal connected
to the game console before starting the game.
Selected item
Description
On
The elapsed time is displayed every
30 minutes when you switch to GAME
mode in external input mode.
Off
Hides the time.
H
Colour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto, PAL,
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL).
• “Colour system” is selectable only when inputting an
S-VIDEO or composite signal.
H
Fine sync. (PC input mode only)
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before
starting Auto sync.
LC19LE520X_EN.indd 15
LC19LE520X_EN.indd 15
11/30/2010 1:24:51 PM
11/30/2010 1:24:51 PM
Содержание LC-19LE520X
Страница 2: ...LC19LE520X_EN indd 1 LC19LE520X_EN indd 1 11 30 2010 1 24 48 PM 11 30 2010 1 24 48 PM ...
Страница 30: ...Memo LC19LE520X_EN indd 28 LC19LE520X_EN indd 28 11 30 2010 1 24 52 PM 11 30 2010 1 24 52 PM ...
Страница 31: ...Cover_LC 19L520X indd 3 Cover_LC 19L520X indd 3 11 2 2010 9 47 48 AM 11 2 2010 9 47 48 AM ...