background image

2

KSH-777DW

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be observed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plug, and body in water or other liquid.
4. Close supervision is necessary when the appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
6. Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in

any manner.

7. The use of accessory attachments not recommended by SHARP may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10.Do not place on or near heat sources such as gas or electric ranges or in a heated oven.
11.Extreme caution must be used when moving an appliance containing hot food, water or other hot liquids.
12.Do not use the appliance for other than intended use.

A. A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord.
B. Extension cords are available and may be used if care is exercised in their use.
C. If an extension cord is used:

(1) The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
(2) The cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by

children or tripped over unintentionally.

PRECAUTIONS

1. Use the rice cooker on a 15 ampere, 120 volt, 60Hz, AC only protected electrical supply.

Insert the plug firmly to ensure safe operation.

2. Do not use the rice cooker on a wet floor, an unstable surface or near flammable materials.
3. Use the inner bowl only in the rice cooker; never on the range top or in the microwave oven.
4. Do not turn the rice cooker on without both rice and water in the inner bowl. Avoid using the rice cooker to heat just water.
5. Never connect the plug or touch the switch or body with wet hands.
6. Do not bend or hit the inner bowl as the cooking results may be affected. Replace the inner bowl if it gets damaged.
7. The cooking switch should be depressed only once for the entire cook/keep warm cycle.

Never insert any object into the switch.

8. Always keep the bottom of the inner bowl, the heating plate and the thermostat clean so that no rice or other foreign

matter accumulates.

Содержание KS-H777DW













Отзывы: