Sharp KS-70S50BSS-EE, Руководство пользователя

Страница: 30 / 136

EN - 3 0
4.2. HOW TO USE THE SMART
LCD CONTROL UNIT
Adjusting the Day Time:
When the built in oven installed firstly the
time of day must be adjusted according
to below instructions.
When oven installed firstly,“0.00” will start
to flash on the display. Touch “M“ sensor
or “ - “ and “ + “ sensors to adjust the day
time mode. “ : ” symbol will start to flash
on the display. You can adjust it with “ - “
and “ + “ sensor.If Auto cooking mode is
off, touch “ - “ and “ + “ sensors at the
same time to the day time mode. You can
adjust it with “ - “ and “ + “ sensor.
You have to adjust the day time to use
oven function.
ADJUSTING THE COOKER
TIME:
Adjusting the Minute Minder:
Touch alarm sensor which shows “ ”
symbol. “ ” will be flashing on the display.
“0.00” will appear on the clock digits. Adjust
the desired time period for the warning by
using Timer Plus and Minus sensor while
the symbol is flashing. Some time after
the completion of the adjustment, symbol
will begin to light continuously. When the
symbol begins to light continuously, the
audible warning time adjustment is done.
When the set time is up, the timer gives
an audible warning and symbol begins
to flash on the screen. Pressing “ - “or
“+“ will stop the audible warning and the
symbol disappears on the screen.
Adjusting the Cooking
Duration Time:
This function is used to cook in the desired
time range. The foods to be cooked are
put into the oven. The oven is adjusted
to the desired cooking function. The oven
temperature is adjusted to the desired
degree depending on the dish to be
cooked. Touch on the “M” sensor until
you see Duration time symbol “ |>| ” on
the timer display screen. “
AUTO
” appear
on the display. Adjusted the cooking period
for the food you wish to cook, by using the
Timer Plus and minus sensor while the
timer is in this position. Some time after