EN-15
ENG
LI
SH
PLASMACLUSTER ION
GENERATING UNIT
(Electrode Section)
1.
Remove the Unit Cover, and pull out
the Unit Holder.
Unit Cleaning Brush
2.
Remove dusts from the Electrode
Section.
Unit Cleaning Brush
Electrode
After
cleaning
Before
cleaning
Around the base
Electrode
3.
Insert the Unit Holder in the product,
and install the Unit Cover.
Click
NOTE
• Do not clean with anything other than the Unit
Cleaning Brush. Doing so could lead to failures
in the Unit.
• A bent electrode could be cut off and dropped
during the cleaning process, but it will not
change the performance.
• Do not press the electrode directly. Doing so
could lead to pain / itching.
• Do not transform the Electrode Section. Doing
so can damage it.
• Do not press the Connection Terminals. Doing
so can damage them.
Connection Terminals
KI-N50A_EN.indd 15
KI-N50A_EN.indd 15
2021/09/24 11:18:22
2021/09/24 11:18:22
