hats and heads and saucepan carriers
to the cooking panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape to the side surfaces of the
oven.
Tape cardboard or paper onto the front
cover on interior glass of the oven as it
will be suitable to the trays, for the wire
grill and trays in your oven not dama-
ge to the oven’s cover during transport.
Also tape the oven’s covers to the side
walls.
If you do not have the original case :
Take appropriate measures to secure
the external surfaces (glass and pain-
ted surfaces) and of the oven to protect
it against possible blows.
EN
-
21
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
T2
5
4
3
2
1
T1
•
Insert the accessory to the correct
position inside the oven.
•
Allow at least a 1 cm space between the
fan cover and accessories.
•
Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
•
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
•
Trays and wire grids can be positioned
on any level from 1 to 5.
•
Telescopic rails can be positioned on
levels T1, T2, 3, 4, 5.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for the turnspit wire
grid positioning with telescopic rails.
****Accessories may vary depending on the
model purchased.