EN - 12
•It is advisable to wipe the oven over with
a sponge soaked in warm water after each
pyrolytic cleaning cycle is carried out.
•During the Pyrolytic operation, some smell
and fume will be emanated due to destruction
of the food residual, it is normal. Oven
cleaning fumes could be fatal to birds and
disturb especially childrens and pets, so all
should be moved into the other room until it
was finished. During the Pyrolytic operation,
the room where the oven installed must be
ventilated sufficiently and the kitchen door
should be closed to avoid passing smell
and fume to other rooms..
ENERGY SAVING
Minimize the amount of liquid or
fat to reduce cooking times.
Oven door should not be opened often
during cooking period.
USE OF OVEN PART
Setting and using the oven
programmer/timer
Selecting manual operati
-
on mode
‘’Minute Minder’’
symbol
‘’Manual operation’’
symbol
‘’Auto’’ function
symbol
After your appliance is connected to
your mains supply for the first time,
the numbers on the timer display will
flash. Before you can select a cooking
function or set a temperature, you must
set the appliance into “manual operati-
on” mode. To select manual operation
mode, press the “minus” or “plus” button
on the control panel while oven function
switch is at “0” position.
Setting the time of day
After setting your oven for manual ope-
ration, you should also set the time of
day. Use the “minus” button and “plus”
button to adjust the time that appears in
the display.
After getting display to the correct time,
release the “minus” and “plus” buttons.
After 5 seconds the time will fix in the
display you will be able to use your
oven.
