TAPE MECHANISM SECTION
Perform steps 1, 2, 5, 6 and 7 of the disassembly method to
remove the tape mechanism. (See Page 3.)
How to remove the playback head
(See Fig. 4-l
1.
to remove the playback head.
Note: After replacing the playback head and completing the
azimuth adjustment, be sure to apply screwlock.
How to remove the pinch roller
(See Fig. 4-l.)
Rotate the pinch roller
2
as shown in
and raise
it.
How to remove the main/motor belt
(See Fig. 4-2.)
1. Remove the motor belt (Cl) xl pc.
2. Remove the main belt (C2)
How
to remove the motor
(See Fig. 4-2.)
Remove the motor belt (Cl) 1 pc.
2. Remove the screws
2
to remove the motor.
How to remove the flywheel
(See Figs. 4-2 and 4-3.)
1. Remove the main belt (C2) 1 pc.
2. Remove the washers
3. Remove the stop washers (D2) 2
with a small precision
screwdriver to extract flywheel from the capstan
Note: When the stop washer is deformed or damaged, replace it
with a new one.
How to reinstall the parts
Install each part in the reverse order of the removal with care.
(Al) 2
Playback
H e a d
Figure
Flywheel
Figure 4-2
Flywheel
Figure 4-3