Sharp IT-23M1U, Руководство по эксплуатации

Страница: 13 / 188

E11
English
Deutsch
Français
Italiano
Español
English
Remote control
Using the remote control
Use the remote control by pointing it towards the
remote sensor window on the monitor. Objects
between the remote control and sensor window
may prevent proper operation.
5 m (16.4 ft.)
Cautions regarding use of remote control
- Do not expose the remote control to shock.
In addition, do not expose the remote control to
liquid, and do not place in an area with high
humidity.
- Do not install or place the remote control under
direct sunlight. The heat may deform the unit.
- The remote control may not work properly if the
remote sensor window of the monitor is under
direct sunlight or strong lighting, or a fluorescent
light is near the monitor. In such case, change
the angle or place of the lighting or monitor, or
operate the remote control closer to the remote
sensor window.
- Do not use the remote control simultaneously
with remote controls of other equipments.
Batteries for the remote control
Before using the monitor for the first time, install
two ("AAA" size, UM/SUM-4) batteries (supplied).
When the operable distance becomes shorter,
replace the batteries immediately with new ("AAA"
size, UM/SUM-4) batteries.
1. Open the battery cover.
Slide the cover while pressing the ( ) part.
2. Insert two ("AAA" size, UM/SUM-4) batteries.
Position the positive and negative ends of the
batteries as indicated in the compartment.
+
+
-
-
3. Close the battery cover.
Engage the claw on the cover into the battery
housing and slide shut.
CAUTION!
Improper use of batteries can result in chemical
leakage and/or explosion. Be sure to follow the
instructions below.
- Place batteries with their terminals
corresponding to the (+) and (–) indications.
- Different types of batteries have different
characteristics. Do not mix batteries of different
types.
- Do not mix old and new batteries. Mixing old
and new batteries can shorten the life of new
battery and/or cause the old battery to leak
chemicals.
- Remove batteries when they become weak.
Chemicals that leak from batteries can cause a
rash. If chemical leakage is found, wipe with a
cloth.
- The batteries supplied with the monitor may
have a shorter life expectancy due to storage
conditions.
- If the remote control will not be used for an
extended period of time, remove the batteries
from the remote control.
Remote sensor window
30°
(up/down/left/right)
30°
IT-23M1U_gb_01.P65 2004/08/23, 15:28 11