– 9 –
IM-MT899H/IM-MT899W
Error Messages
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
BLANK
●
Nothing is recorded.
(Replace the disc with a recorded disc.)
busy
●
A track is being moved.
Can'tC
●
You tried to record from a copy prohib-
ited MiniDisc.
●
You tried to record signals other than
music (such as data).
(Record using the analogue cable.)
Can'tE
●
A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can'tL
●
You tried to record or edit the MD
whilst operating the OPEN lever.
Can'tP
●
Cannot play the MD.
Can'tR
Recording cannot be performed correctly
due to vibration or shock.
Can'tS
Can'tT(*)
Can'tU
●
The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
Can'tSTAMP
●
Stamp function does not work.
(Check the number of tracks.)
ERROR MES-
SAGES
MEANING
Can'tW
●
Cannot save the TOC information cor-
rectly to a MiniDisc.
CH
(displayed on
the main unit)
●
You tried to operate whilst charging.
D-FULL
●
The disc is out of recording space.
DEFECT
●
The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
Er-MD (**)
●
The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
G-FULL
●
The total number of groups exceeds
99.
(Erase unnecessary groups.)
HOLD
●
The unit is in the hold mode.
LoBATT
●
The rechargeable or alkaline battery
has run down.
LOCKED
●
You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
Number or symbol appears in (*) position.
If the operation is not accepted, "--" may be displayed on the
main unit. For details, refer to the display on the remote con-
trol.
ERROR MES-
SAGES
MEANING
N-FULL
●
The number of a disc, group, or track
name exceeds 40.
(Shorten the name.)
NoDISC
●
A disc has not been loaded.
noSIG
●
Poor connection of the digital cable.
●
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
●
The input signal has improper sam-
pling frequency.
NoTRACK
●
There is no track to be played.
PLAYmd
●
You tried to record on a playback-only
disc.
POWER ?
●
The battery charger is defective.
PROTECTED
●
The write protection tab of a MiniDisc
is set to the protected position.
Sorry
●
Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a while and try the operation
again.)
T Form (*)
●
There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
ERROR MES-
SAGES
MEANING
T-FULL
●
There is no space left for recording
character information (track names,
disc names, etc.).
TEMP!
●
The temperature is too high.
(Turn off the power, and wait for a while.)
Tr. Protect
●
The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
?DISC
●
A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
?GrForm
●
The group recording or the GROUP
RESERVE function cannot be per-
formed.
(Erase the disc name and retry the same
operation.)
Error Messages
