Sharp HT-SBW125, Руководство по эксплуатации

Страница: 15 / 20

E-14
General control (continued)
■
Audio format
During the HDMI ARC and OPTICAL IN function
the LED indicator will light up to indicate the audio
format.
Audio format
LED
indicator
Dolby
Digital One of the digital audio
systems for theatrical use.
You can also enjoy the ste-
reophonic effect in the home
theatre system. Lights up
when detecting Dolby Digital
signal. Blue
PCM
(Pulse
Code
Modu-
lation) This is a general term for
digitally encoded audio
signals on a CD or DVD.
This sound bar lets you
enjoy playback of digital
signals from sources such as
CD or DVD. Green
Note:
While in HDMI ARC or OPTICAL mode, if there
is no sound output from the sound bar and the
HDMI ARC or OPTICAL indicator blinks Dolby
Digital or PCM signal output on your source
quickly, you may need to activate device (eg. TV,
DVD or Blu-ray player).
■
Auto power on function
Auto power on function works only during
standby mode. It will not work if the sound bar is
in low power consumption mode .
Optical In:
Turn off the external source. The sound bar will
automatically power on if the external source is
turned on again.
■
Auto power off and auto detect signal
The sound bar will automatically go to standby
mode if:
Optical In:
No audio signal is detected after approximately 15
minutes.
Bluetooth:
Not connected condition, in the pause or stop
mode and no incoming signal from device after
approximately 15 minutes.
USB:
In the stop mode or no USB device is plugged in
after approximately 15 minutes.
■
Bass and Treble Control (remote control)
Bass Control
1. Press the BASS button.
2. Within 5 seconds, press the + / - button to
adjust the bass.
Treble Control
1. Press the TREBLE button.
2. Within 5 seconds, press the + / - button to
adjust the treble.
HDMI ARC/OPTICAL/AUDIO IN
1. Ensure that the sound bar is connected to the
TV or audio device.
2. While in power on mode, press the button
on the sound bar or remote control repeatedly
to select the desired mode.
LED indicator colour Function
WHITE HDMI mode
GREEN Audio In mode
ORANGE Optical mode
3. Operate your audio device directly for playback
features.
4. Press the + or – button to adjust the volume to
your desired level.
Note:
While in HDMI ARC or OPTICAL mode, if there is
no sound output from the sound bar and the HDMI
ARC or OPTICAL indicator blinks quickly, you
may need to activate Dolby Digital or PCM signal
output on your source device (eg. TV, DVD or Blu-
ray player).