manualshive.com logo in svg

Sharp HT-SB350(BK), Руководство по эксплуатации, Страница: 31 / 34

Поделиться
Скачать
Sharp HT-SB350(BK) Скачать руководство пользователя страница 31

DE (1)

FR (2)

ES (3)

SV (4)

IT (5)

NL (6)

PT (7)

ZH (8)

EN (9)

AR (10)

E-18

HT-SB350(BK)

2010 August 16 

HT-SB350_A6_EN_UK.fm

ENGLISH

HT-SB350(W)

References

Troubleshooting chart

Many potential problems can be resolved by the owner without calling

a service technician.

If something is wrong with this product, check the following before

calling your authorised  SHARP dealer or service centre.

General

Remote control

Condensation

Sudden temperature changes, storage or operation in an extremely

humid environment may cause condensation inside the cabinet or on

the transmitter on the remote control.

Condensation can cause the unit to malfunction. If this happens, leave

the power on until normal operation is possible (about 1 hour). Wipe off

any condensation on the transmitter with a soft cloth before operating

the unit.

 If problem occurs

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply voltage

due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1. Set the unit to the stand-by mode and turn the power on again.

2. If  the  unit  is  not  restored  in  the  previous  operation,  unplug and

plug in the unit, and then turn the power on. 

Symptom

Possible cause

No sound is heard.

Is the input signal (selection) set 
properly?
Is the volume level set to “0”?
Is muting activated?

Noise is heard during 

playback.

Move the unit away from any 
computers or mobile phones.

When a button is 

pressed, the unit does 

not respond.

Set this unit to the stand-by mode and 
then turn it back on.

The power is not turned 

on.

Is the unit unplugged? (Refer to page 
13)
The protection circuit may be
activated. Unplug and plug in the 
power lead again after 5 minutes or 
more.

The information is not

displayed even if the

unit is turned on.

Is the unit set to “Dimmer display off” 
mode?

Symptom

Possible cause

The remote control does 

not operate properly.

Is the battery polarity correct?

Is the battery dead?

Is the distance or angle incorrect?

Are there any obstructions in front of the 

unit?

Is there a  strong light shining on the 

remote sensor?

Is the remote control for another 

equipment used simultaneously?

Symptom

Possible cause

The unit cannot be 

turned on with the 

remote control.

Is the AC power lead of the unit plugged 

in?

Is the battery inserted?

TV cannot be operated 

with the remote control.

Depending on the model, some or all 

functions may not be operable using the 

remote control of this unit. In this case, 

use the remote control supplied with the 

TV.

Содержание HT-SB350(BK)



































Отзывы:

Нет отзывов