04/1/28
GX-CD1300MP MK2_EN
E-8
ENGLISH
GX-CD1300MP
MK2
Preparation for Use
■
Speaker connection
Connect each speaker wire to the SPEAKER terminals as shown.
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
Caution:
●
Connect the black wire to the minus (–) terminal, and the red wire
to the plus (+) terminal.
●
Do not mix the right channel and left channel wiring when
connecting the speakers to the unit.
●
Do not let the bare speaker wires touch each other as this may
damage the amplifier and/or speakers.
●
Do not stand or sit on the speakers. If the speakers fall or collapse,
you may be injured.
Note:
The speaker grille is not removable.
■
AC power connection
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into an AC socket. If necessary, adjust
the selector to correspond to the AC power voltage used in your
area.
Selector adjustment:
Slide the selector with a screwdriver to the appropriate voltage
number (AC 110 - 127 V or AC 220 - 240 V).
RIGHT
LEFT
+
+
_
_
2
1
3
Left speaker
Right speaker
Red
Red
Black
SPEAKER (6
Ω
)
AC 220V
- 240V
VOLTAGE
SELECTOR
AC 110V
- 127V
AC 220V
- 240V
VOLTAGE
SELECTOR
AC 110V
- 127V
1
2
To the wall socket
110 - 127/220 - 240 V
50/60 Hz
To AC INPUT
