DC Inverter Cassette Type Unit
10
TEMP
button
●
By pressing this button it is allowed to select displaying the indoor setting
temperature or the indoor ambient temperature.
●
Indoor setting temperature is default after the indoor unit is energized
initially.
●
By pressing the TEMP button, when the temperature symbol
is
displayed, the
indoor displaye
r will show the indoor setting temperature;
when
is displayed, it will show the indoor ambient temperature;
when
is invalid, If current displays indoor ambient temperature,
if received the other remote control signal, it will display presetting
temperature, 5s later, will back to display the ambient temperature. (This
function is applicable to partial of models)
11
TIMER
OFF button
●
By pessing this button it is available to go to the TIMER OFF settting
state with the same setting method as that of the TIMER ON, in which
case the OFF symbol blinks.
12
TURBO
button
●
In the Cool or Heat mode, pressing this button can activate or deactivate
the TURBO function.When the TURBO fucntion is activated, its symbol
will be displayed; when the running mode or the fan speed is changed,
this function will be canceled automatically.(This function is applicable to
partial of models).
13
SLEEP
button
●
By pressing this button, Sleep On and Sleep Off can be selected. After
powered on, Sleep Off is defaulted. Once the unit is turned off, the Sleep
function is canceled. When Sleep is set to On, the symbol of SLEEP
will display.Under the Fan and Auto modes, this function is not available.
14
LIGHT
button
●
Press this button to select LIGHT on or off in the displayer. When the
LIGHT is set to on, the icon
will be displayed and the indicating light
in the displayer will be on. When the LIGHT is set to off, the icon
will
be disappeared and the indicating light in the displayer will be off.
6.2 Introduction for special function
●
About X-FAN function
(This function is applicable to some special models)
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is
stopped to avoid mould.
This function indicates that moisture in the evaporator of the indoor unit will be blew out after
the unit is stopped so as to avoid mould.
①
With X-FAN function ON: After turning off the unit by pressing ON/OFF button indoor fan
will continue running for severval minutes at low speed. In this period, press X-FAN button to stop
indoor fan directly.
②
With X-FAN function OFF:After turning off the unit by pressing ON/OFF button, the
complete unit will be off directly.
●
About TURBO function
(This function is applicable to some special models)
If the TURBO function is activated, the unit will run at high fan speed to perform cooling or
33
