DISASSEMBLY
Prior to the disassembly, be sure to remove the AC power
supply cord, cassette tape and batteries from the unit.
• FRONT CABINET REMOVAL
(Refer to Figures
and 5-3)
Remove the eight screws ® and the six knobs
2. Push the stop/eject Button to open the cassette holder.
3. Pull the front cabinet frontward by holding its upper
part and disconnect the speaker socket © .
• MECHANISM BLOCK REMOVAL
(Refer to Figure
1. Remove the two screws © and the Digital Tape
Counter Belt
2. Disconnect the three sockets
then the mechanism
block can be removed.
Figure
Figure 5-2
Figure
REMOVAL
(Refer to Figure
Remove the two knobs
2. Disconnect the two tips
3. Remove the six screws
, then amp. and tuner P.W.B.
can be removed from the back cabinet.
Figure
VOLTAGE SELECTION
Before operating the unit on mains, check the preset voltage.
If the voltage is different from your local voltage, adjust the
voltage as follows: Slide the AC power supply socket cover
by a little loosing screw to the visible indication of the side
of your local voltage. See Figure 5-5.
'
о о
о
о
Screw
I
Screw
Figure
-5-
