background image

• Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is

loose.

Electrical shock, short circuit and/or fire may occur as a result.

• Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects

on the power cord.

If the power cord is damaged, fire and/or electrical shock may occur as a result.

• Use AC 220-240V only.

Fire and/or electrical shock may occur as a result.

• Do not modify. Repair and disassembly of this product are to be performed by authorized

service personnel only.

Fire, electrical shock and/or bodily injury may occur if not.
For repair, contact your dealer of purchase or the nearest Sharp Service Centre.

• Periodically remove dust from the power plug

Accumulated dust on the power plug may cause bad insulation from humidity, etc.
Fire and/or electrical shock may occur as a result.

• When cleaning the unit, be sure to remove the power plug from the wall outlet.

In addition, never handle the power plug with wet hands.
Electrical shock and/or bodily injury may occur as a result.

• Do not use the unit where there are oil ingredients such as cooking oil, etc., in the air.

Cracking of the unit surface may occur as a result.

• Do not wipe the unit with benzene or paint thinner. Also, do not spray insecticides on the unit.

Cracking, electrical shock and/or fire may occur as a result.

• Do not operate the unit when using indoor smoke-generating insecticides.

Chemical ingredients may accumulate within the unit and then discharge from the Air Outlet when the

unit operates. Discharge of such chemicals may be unhealthy to your body.

• Do not allow the unit to intake flammable gases, sparks from lit cigarettes, incense, etc.

The unit may ignite as a result.

• Do not use the unit where it is humid, such as in a bathroom, or where the unit may get wet.

Electrical shock and/or malfunction may occur as a result.

• Do not insert fingers or foreign objects into the intake or Air Outlet.

Electrical shock and/or malfunction may occur as a result.

• When removing the power plug, always hold the plug and never pull the cord.

Electrical shock and/or fire from short circuit may occur as a result.

• Ventilate when using the unit along with a heating appliance.

Carbon monoxide poisoning may occur as a result.

• Remove the power plug when not using the unit.

Electrical shock from bad insulation  and/or fire from short circuit may occur as a result.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or

similarly qualified person in order to avoid a hazard.

• The batteries must be removed from the appliance before it is scrapped and that they are

disposed of safely.

SAFETY PRECAUTIONS

E-2

Содержание FU-60SE-K





















Отзывы: