Sharp FU-440E, Руководство по эксплуатации

Страница: 13 / 99

ENGLISH
CARE AND MAINTENANCE
To maintain optimum performance of this air purifier, please clean the unit including
the sensor and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug
with wet hands. Electrical shock and/or bodily injury may occur as a result.
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to
remain, they may become hard to clean.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Keep the unit away from water
DUST/ODOR SENSORS
Hole of odor sensor
Odor Sensor
Main Unit
HEPA Filter
Active Carbon Filter
Hole of dust sensor
Dust Sensor
Pre Filter
Do not wash the HEPA Filter.
Washing will not improve filter performance, and
it may even cause electric or malfunction.
The sensitivity of the sensors will become
unstable if the odor or dust sensor is dirty
or blocked. Remove dust from the sur-
faces of the sensor openings using a
vacuum cleaner.
E-11
MAIN UNIT
PRE-FILTER
As shown in a figure, clean the top
surface of the Pre- Filter lightly with a
vacuum cleaner.
When Pre- Filter is very dirty, wash it with
water added a mild kichen detergent and
dry Pre-Filter well in the shade.
Pre-Filter