![Sharp FP-J40A Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/sharp/fp-j40a/fp-j40a_operation-manual_364658010.webp)
EN-8
To maintain optimum performance of this air purifi er, please clean the main unit including the fi lter periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
CARE AND MAINTENANCE
SENSORS
1. Remove the Pre-Filter ( Back Panel ).
2. Remove the Dust Sensor Filter.
3. If it is very dirty, wash it with water and dry it thoroughly.
Dust sensor
fi lter
Gently remove dust from the odor sensor by using a
vacuum cleaner attachment or
similar tool.
Dust sensor
Odor sensor
Odor sensor
Do not WASH
Pre-Filter ( Back Panel )
Once in a month
When the fi lter reset indicator light is on
MAIN UNIT
Once in
two months
HEPA FILTER
When the smell from the Air Outlet
When the smell is hard to take
ACTIVE CARBON
DEODORIZING FILTER
When the smell from the Air Outlet
When the smell is hard to take
SENSORS
Once in
two months
Gently remove dust from the Pre-Filter ( Back Panel ) with a vacuum
cleaner attachment or
similar tool.
Pre-Filter
( Back Panel )
Do not apply excessive pressure when scrubbing the Pre-Filter ( Back
panel) .
Pre-Filter
( Back Panel )
NOTE How to clean hard to remove dirt
1. Add a small amount of kitchen
detergent to water and soak for
about 10 minutes.
2. Rinse off the kitchen detergent
with clean water.
3. Completely dry the fi lter in a
well-ventilated area.
Pre-Filter
( Back Panel )
CAUTION
Please reset the fi lter reset indicator
after cleaning.
After
more than 3 sec.
OM_FP-J40A.indd 8
2018/09/28 12:02:08