E-10
TROUBLESHOOTING
Before calling for service, please review the troubleshooting list below, since the problem may not be
a unit malfunction
.
SYMPTOM
REMEDY (not a malfunction)
Dust and smoke are not removed.
• Clean or replace the filter if they appear to be heavily
soiled. (Refer to E-8,E-9
)
A clicking or ticking sound is heard
from the unit.
• Clicking or ticking sound may be audible when the unit
is generating ions. (Refer to E-7
)
The discharged air has an odor.
• Check to see if the filter are heavily soiled.
Replace the filter.
• Plasmacluster Air Purifiers emit small traces of ozone
which may produce an odor. These ozone emissions
are well below safety level.
The Plasmacluster Ion Indicator
doesn’t Light on.
• Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
• Check to see if the Plasmacluster Ion OFF is selected.
Press
for 3 seconds to light On.
• Check to see if the Light Control OFF is selected.
Press
for 3 seconds to light On.
AUTO RESTART
• Even when the plug is unplugged or the breaker
is thrown during operation, the unit resumes at the
previous operation mode and settings if the power
recovers.
ON
(default)
OFF
(with the unit OFF)
(with the unit OFF)
If the
,
,
lights Lights up for
10 seconds, the setting is ‘ON’.
(simultaneously for more than 3 sec.)
(simultaneously for more than 3 sec.)
If the
,
,
lights flashes for 3
seconds, the setting is ‘OFF’.
OM_FP-H30A.indd 10
2018/01/11 11:54:44
