Setting 6: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension phone
connected to the same line as the fax, you can make the fax begin reception by
pressing
5
,
*, and * on the phone. Use this setting if you want to use a
number other than
5
to begin fax reception. You can enter any number from
0
to
9
.
•
Initial setting:
5
FUNCTION
4
Press
until
display
shows:
TEL/FAX REMOTE #
Enter a number
from
0
to
9
REMOTE RECEPTION
STOP
Setting 7: REMOTE RECEPTION SELECT
If you don’t intend to use the above TEL/FAX REMOTE NUMBER, you can
turn detection of the number off. This will ensure that the fax never mistakenly
attempts to begin reception if it detects a signal similar to the TEL/FAX
REMOTE NUMBER while you are talking on an extension phone. Press
1
to
turn detection on, or
2
to turn detection off.
•
Initial setting:
1
FUNCTION
4
Press
until
display
shows:
REMOTE RECEPTION
STOP
2
1
YES
NO
or
TRANSACTION LIST
Setting 8: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number
from
1
to
5
as follows:
1
(ALWAYS PRINT):
A report will be printed after each transmission,
reception, or error.
2
(ERR/TMR PRINT):
A report will be printed after an error, timer
operation, or memory operation.
3
(SEND ONLY):
A report will be printed only after a transmission.
4
(NEVER PRINT):
A report will never be printed.
5
(ERROR ONLY):
A report will be printed only after an error occurs.
•
Initial setting:
3
FUNCTION
4
Press
until
display
shows:
TRANSACTION LIST
Enter a number
from
1
to
5
DIAL MODE
STOP
8
.Op
tio
n
S
e
tti
n
g
s
Option Settings
89
