Sharp FO-5500, Руководство по обслуживанию

Страница: 9 / 14

3
Plug the power cord into a 120V, 60Hz, grounded (3-prong) AC
outlet.
Press the power switch to turn on the power.
4
Attach the original document OUT tray by inserting the tabs into
the holes in the fax as shown.
5
Attach the received document tray by inserting the tabs into the
holes in the fax as shown.
6
Insert the male end of the PC interface cable into the port on the
right side of fax as shown. Tighten the attached screws with a
screwdriver.
7
Insert the female end of the PC interface cable into the serial
(RS-232C) port on your computer.
Tighten the attached screws with a screwdriver.
4. Loading printing paper
The paper cassettes and the paper tray hold the paper on which
received documents are printed. If needed, a second cassette is
available as an option from your dealer.
The paper cassette can hold 500 sheets of either legal or letter size
paper. The paper tray can hold 150 sheets of either legal or letter size
paper.
1
Grasp the hand hold on the cassette as shown, lift the cassette
slightly, and then pull it out as far as it will go. Do not force.
Push down on green levers on both sides of the cassette tray as
shown, and then pull it completely out of the fax using both hands.
FO-5500U/C
1 – 7