Sharp FO-50, Руководство по обслуживанию

Страница: 40 / 102

FO-50RA
FO-70RA
Head guide, PO guide, cutter guide
upper and cutter
Fig. 7
3 – 9
Parts list (Fig. 7)
No. Part name Q’ty No. Part name Q’ty
1 Mechanism unit 1
2 Cutter guide upper 1
(FO-70 only)
3 PO guide unit 1
(FO-70 only)
4 Pinch roller spring 2
(FO-70 only)
5 Pinch roller 2
(FO-70 only)
6 PO guide (FO-70 only) 1
7 Screw (3
×
8) 1
(FO-50 only)
8 PO guide (FO-50 only) 1
9 Release lever 1
(FO-50 only)
10 Head guide 1
11 Screw (3
×
6) 1
(FO-70 only)
12 Cutter cushion 1
(FO-70 only)
13 Cutter (FO-70 only) 1
7
1
2
3
4
4
5
1
10
11
13
6
8
9
7
2
3 4 5
7
8
9
6
Fix position
OK
NG
10
11
12
RELEASE
12
13
(CUTTER MODEL ONLY)
NOTE: This cutter is built and adjusted to high precision and
therefore requires special care when handling.
Please refer to the following and carefully observe the
instructions within for proper handling.
1. Do not grip the cutter tightly.
2. Do not press down on the cutter.
3. Do not twist the cutter.
4. Do not disassemble the cutter.
5. Do not wipe off the grease on the edge of the cutter blade.