CHAPTER 1. GENERAL
This manual describes the ER-A320 disassembly procedures and the
option attachment procedures. For assembly procedures, reverse the
disassembly procedures. For attachment of options which do not re-
quire special descriptions, descriptions are omitted.
Note for operations
·
Before operation, ground the operator’s body and perform other
necessary measures against static electricity.
·
During operations, disconnect the AC cord from the outlet.
·
After completion of operations, connect the connectors.
·
After completion of operations, be sure to perform the master reset.
Master reset (All memory clear)
Used to clear all memory contents and return machine back to initial
settings.
(Returns keyboard back to the default keyboard layout.)
Procedure
1) Unplug the AC cord from the wall outlet.
2) Set the MODE switch to the (SRV’) position.
3) Plug in the AC cord to the wall outlet.
4) While holding down JOURNAL FEED key, turn from (SRV’) posi-
tion to the (SRV) position.
Note: 1. The ER-A320 display will flash the "." decimal point at the
right most position and will beep 3 times.
2. The ER-A320 printer will cycle and print the following on the
journal
CHAPTER 2. LIST OF OPTIONS
1. Sales options
No.
NAME
MODEL
DESCRIPTIONS
1
COIN CASE
ER-55C2
5B/5C(For "U" version)
2
KEY TOP KIT
ER-11KT7
1 x 1 key top
ER-12KT7
1 x 2 key top
ER-22KT7
2 x 2 key top
ER-11DK7G
1 x 1 dummy key
ER-51DK7G
5 x 1 dummy key
2. Service options
No.
NAME
PARTS CODE
PRICE RANK
DESCRIPTIONS
1
SRV KEY
AK
2
MODE KEYGRIP COVER
AL
OP key only
3
DRIP-PROOF KEYBOARD COVER
BE
3. Supplies
No.
NAME
PARTS CODE
PRICE RANK
DESCRIPTIONS
1
ROLL PAPER
AR
2
INK ROLLER
AY
3
INK FOR STAMP
AK
1
