manualshive.com logo in svg

Sharp ER-A280F, Инструкция по эксплуатации

Поделиться
Скачать
Sharp ER-A280F Скачать руководство пользователя страница 176

174

■

Cautions in handling the recording paper (thermal paper)

• Use only the paper specified by SHARP.
• Do not unpack the thermal paper until you are ready to use it.
• Avoid heat. The paper will color at around 70°C.
• Avoid dusty and humid places for storage. Avoid direct sunlight.
• The printed text on the paper can discolor under the following conditions:

Exposure to high humidity and temperature
Exposure to the direct sunlight
Contact with glue, thinner or a freshly copied blueprint.
Heat caused by friction from scratching or other such means.
Contact with a rubber eraser or adhesive tape.

• Be very careful when handling the thermal paper. If you want to keep a permanent record, copy the printed

text with a photocopier.

ER-A280F_N(SEEG)(E)-9  09.6.18 6:56 AM  Page 174

Содержание ER-A280F





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды