E-10
GRIND
1
Lay the appliance on the flat horizontal surface and make sure it is unplugged.
2
Prepare 200 g roasted coffee beans, and then remove the Measuring Cup and Jug Lid
and put the roasted coffee beans into the Jug, after it, close the Jug Lid and Measuring
cup well in position.
Note: The maximum capacity of food to be grinded must not exceed 200 g.
3
Connect the appliance with power source, and then push the Power switch to “ON”
position.
4
Push the function switch to “Pulse” setting and the appliance starts to grind coffee
beans.
5
After grinding for about 30 seconds, turn the Speed Switch to “OFF” position, and the
appliance stops working.
Note:
• During operation, if the coffee powder is too thick to be grinded, operate by referring to the
description of “Tamper” mentioned above.
• Do not remove the Jug from the Motor Unit during working process. If it is necessary to
remove the Jug, please firstly turn off the appliance to make it stop working and then
remove it.
• The advisable operation time per time is 3 minutes and minimum 1 minute rest time must
be maintained between two consecutive cycles. Allow the appliance to rest for at least 30
minutes every 10 cycles.
6
After finish working, move the Jug out of the Jug Support Pad, and then carefully take
down the Measuring Cup and Jug Lid, then pour and serve.
CAUTION: The Speed Switch and Power Switch must be at “OFF” positions and the power
outlet must be unplugged before removing the Jug.
MAKE HOT SOUP
1
Lay the appliance on the flat horizontal surface and make sure it is unplugged.
2
Remove the Measuring Cup and Jug Lid, and then put the required ingredients into
the Jug and fill the Jug with appropriate amount of room-temperature purified water.
The amount of mixture should not exceed 1000 ml. And then close the Jug Lid and
Measuring Cup well in position.
3
Connect the appliance with power source, and then push the Power switch to “ON”
position.
4
Push the function switch to “Soup” setting and the appliance starts to make soup.
NOTE: The machine runs slowly at the first 15 seconds and will accelerate when detecting food.
5
After cooking for about 6 minutes, the Switch will turned off automatically.
High speed blender_EMF2056.indb 10
High speed blender_EMF2056.indb 10
10/5/2016 10:29:28 AM
10/5/2016 10:29:28 AM
