4
Cautions
Basics of use
Hand control switch
Stop
High
Low
Starting the vacuuming
Metal telescopic tube
Regarding the power cord
Finishing the vacuuming operation
High
Low
Stop
Stop
High mode: When you want to vacuum at the maximum suction
power press the High button.
(Blue: Lighting)
Low mode: When you want to reduce noise, or when you want to
release the head from smaller mats, press the Low button.
(Blue: Slow-speed blinking)
Vacuuming operation stops.
The automatic cleaning mechanism activates to compress
the rubbish and auto cleans the high efficiency air filter.
When you want to stop the operation of the cleaning
mechanism, press the “Stop ” button again.
•
Do not draw out the power cord beyonding the red
mark limit.(There is a risk of cable disconnection.)
•
When you cannot roll up the cord completely, draw it
out again for a length of 1 to 2 m and attempt to roll it
up again.
•
When rolling up the cord, press the cord winding button
firml
y.
•
Do not slide the extension/contraction button while vacuuming.
(
There is a risk that fingers might get caught in the metal telescopic tube.
)
•
Do not do vacuuming without attaching the suction head or other supplementary suction tools.
(
There is a risk of property damage or malfunction.
)
Adjust the length while
sliding the button.
Cord winding button
Red mark
Indication lamp
Indication lamp
Blue
Blue
Indication lamp
USING THE VACUUM CLEANER
EC-S2142,S2141.indd 4
12.5.8 2:58:09 PM
