- 27 -
EN
Direct Selection of Tracks
Selecting by Time
You can play the audio CD starting from any time point you
want.
Press
SEARCH MODE
on the remote control during
playback.
The time search box is displayed on the screen as GO TO
_ _ : _ _ / xx : xx.
Enter the time using
number buttons
.
Player goes to entered time of the current track.
¥
NOTE:
If you give up entering the time simply press
RETURN
or
C
, and the operation is cancelled.
Accessing Tracks Using Number Buttons
You can play any track you want, just by pressing the
corresponding
number button
.
For the track numbers which are greater than 9 use
+10
button. Press this button once and then type the two-digit
track number.
If you attempt to enter a number greater than the total
number of tracks on disc,
´
symbol is displayed on
screen.
Repeat Play
Press
REPEAT
during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
If
REP-ONE
is displayed, the current track will be played
again.
If
REP-ALL
is displayed, the whole disc will be played
again.
If
REPEAT OFF
is displayed, the repeat mode is disabled.
¥
NOTE:
If the play list is active, the playlist is repeated instead of
the whole disc in Repeat All case.
Repeating Sections Between Two Specific Points
(A B repeat)
Press
A-B
during playback at the point where repeat play
is to commence (A).
A TO B SET A is displayed.
Press
A-B
again at the point where repeat play is to be
concluded (B).
A TO B SET B is displayed and the repeat-play of the
selection between points A and B starts.
To return to normal play:
Press
A-B
again. A TO B CANCELLED is displayed and
the A-B Repeat is disabled.
¥
NOTE:
If you give up entering the point B after entering A simply
press
RETURN
or
C
, and the operation is cancelled.
Downloaded from
www.Manualslib.com
manuals search engine
