Sharp DV-SL1200W, Руководство по эксплуатации

Страница: 50 / 56

49
DV-SL2200W
DV-SL1200W
Troubleshooting chart (continued)
References
References
H
If problem occurs
When this product is subjected to strong external interference (mechanical
shock, excessive static electricity, abnormal supply voltage due to lightning,
etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Turn the unit power off and on again.
2 If the unit is not restored in the previous operation, unplug and plug in
the unit, and then turn the power on.
H
Before transporting the unit
1 Press the ON/STAND-BY button to turn the power on.
2 Press the
0
OPEN/CLOSE button to open the disc tray.
Remove the disc inserted in the unit.
3 Press the
0
OPEN/CLOSE button to close the disc tray.
4 Press the ON/STAND-BY button to switch off, and then unplug the
AC power lead from the wall socket.
H
Remote control
The remote control does not
operate properly.
I
Is the battery polarity respected?
I
Are the batteries dead?
I
Is the distance or angle incorrect?
I
Are there any obstructions in front of the
unit?
I
Is the remote control sensor exposed to
strong light (inverter fluorescent light,
direct sunlight, etc.)?
I
Is the remote control for another
equipment used simultaneously?
Symptom Possible cause
H
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Using the front panel buttons only, press and hold the
7
button and then
press ON/STAND-BY button until “CLEAR” appears in the unit display.
Notes:
I
This operation will erase all data stored in the memory.
I
All the player’s settings are now reset to the factory default.
H
Condensation
Sudden temperature changes, storage or operation in an extremely humid
environment may cause condensation inside the cabinet (laser pickup, etc.)
or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the
power on with no disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
DV-SL1200_2200W 42-52 6/16/08, 4:36 PM 49