– 8 –
EN
Use the SCART cable (com-
mercially available) to connect
the Player to your TV.
SETTING UP YOUR DVD PLAYER
Connecting a TV with AV OUT SCART socket
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.
If your TV has two SCART sockets
TV
DVD Player
DIGITAL
R
L
AUDIO OUT
VIDEO
S-VIDEO
VIDEO OUT
AV (TV)
To SCART
input
To AV OUT
SCART
SCART Cable
(commercially available)
TV
DVD Player
VCR
SCART OUTPUT
DIGITAL
R
L
AUDIO OUT
VIDEO
S-VIDEO
VIDEO OUT
AV (TV)
To SCART
input
To AV OUT
SCART
To SCART
output
To SCART
input
SCART Cable
(commercially available)
SCART Cable
(commercially available)
NOTE:
• The player is continuously outputting the RGB and the VIDEO (COMPOSITE)
signal. Select either (RGB or COMPOSITE) signal on your TV side.
Some TV can recognize the RGB signal automatically. In this case, the player
outputs the RGB signal prior to the VIDEO (COMPOSITE) signal.
• When you play the VCR, please select the VIDEO (COMPOSITE) signal on
your TV. Otherwise the VCR image will not be seen.
Please refer to your TV’s manual for more information.
E56H9ED(EN).QX3 02.9.28 5:21 PM Page 8
