Sharp DV-NC230S, Руководство по эксплуатации

Страница: 12 / 39

S
ETUP
– 12 – EN
Clock Set Up
VCR/DVD COMBINATION NA527AD
1 2 3
6 5 4
7
0 +10
8 9
STOP
PLAY
VCR DVD
press first.
This VCR/DVD incorporates a 24-hour clock. The clock must be set for the Timer
Recording function to operate correctly.
1.
Select “INITIAL”.
or
To decide.
MENU
TIMER
SET
UP
B INITIAL
2.
Select “CLOCK”.
or
To decide.
INITIAL
CH TUNING
B
CLOCK
LANGUAGE
3.
Select “MANUAL” or “AUTO”.
or
To decide.
B
MANUAL
AUTO [OFF]
• If you select “MANUAL”, continue with step
4
.
• If you select “AUTO”, Auto Clock Setting becomes ON. Then press
MENU
to exit. The clock time will appear automatically when
you next turn the VCR mode off and on.
4.
Select the current year.
or
To decide.
CLOCK
B
YEAR 2005
MONTH 01
DAY 01 SA
HOUR
_ _
MINUTE _ _
5.
Select the current month.
CLOCK
YEAR 2005
B
MONTH 01
DAY 01 SA
HOUR
_ _
MINUTE _ _
or
To decide.
6.
Select the current day.
CLOCK
YEAR 2005
MONTH 07
B
DAY 01 FR
HOUR
_ _
MINUTE _ _
or
To decide.
7.
Select the current hour.
CLOCK
YEAR 2005
MONTH 07
DAY 16 SA
B
HOUR
_ _
MINUTE _ _
or
To decide.
8.
Select the current minute.
CLOCK
YEAR 2005
MONTH 07
DAY 16 SA
HOUR 01
B
MINUTE
_ _
or
To decide.
9.
To exit the CLOCK screen.
Hint
• To go back one step, press Cursor
s
(during the steps
3
to
8
).
• Although seconds are not displayed, they begin counting from 00
when you exit by pressing MENU . Use this feature to synchronise
the clock with the correct time.
• Repeat these steps only if either there was a power failure or this
VCR/DVD has been unplugged for more than 1 hour.
Auto Clock
• Channel Presetting must be set before the Auto Clock is set.
• To set the clock automatically, the channel assigned to position 01
must have the PDC signal.
• The clock cannot be set automatically if you are not receiving a
channel that carries a time signal in your area. In this case, set the
clock manually.
• Once the Auto Clock setting is performed, the VCR/DVD will correct
the current time by receiving VPS/PDC broadcasts whenever you
turn off the VCR/DVD.
• The VCR/DVD will correct the current time automatically at 8:00, if
the VCR/DVD power is turned off.
• Between 23:00~1:00, the Auto Clock function does not work even if
the VCR/DVD power is turned off.
Select a Channel
VCR/DVD COMBINATION
NA527AD
1 2 3
6 5 4
7
0 +10
8 9
STOP
PLAY
VCR DVD
press first.
You can select a desired channel by using
CH K
/
L
or directly
pressing
the Number buttons
on the remote control.
1.
or
Select your desired channel number.
Hint
• Enter a channel numbers as a two-digit number for the quickest
results. For example, to select channel 6, press
0
and
6
. If you only
press
6
, channel 6 will be selected after a brief delay.
• You can only select channels 1–99.
Picture Select
VCR/DVD COMBINATION
NA527AD
1 2 3
6 5 4
7
0 +10
8 9
STOP
PLAY
VCR DVD
press first.
This function enables you to select the picture quality of a tape.
1.
Select “SET UP”.
or
To decide.
MENU
TIMER
B
SET UP
INITIAL
2.
Select “PICTURE”.
or
SET UP
AUTO RETURN [ON]
AUTO REPEAT [OFF]
B
PICTURE [NORMAL]
3.
SET UP
AUTO RETURN [ON]
AUTO REPEAT [OFF]
B
PICTURE [SOFT]
To switch “NORMAL”, “SOFT” or “SHARP”.
4.
To exit the PICTURE screen.
Hint
• Once you select the Picture Select mode, it stays in effect even
after you turn off the VCR/DVD.
Manual Channel Preset
VCR/DVD COMBINATION
NA527AD
1 2 3
6 5 4
7
0 +10
8 9
STOP
PLAY
VCR DVD
press first.
Each channel is tuned manually and individually. DO NOT use
“Automatic Channel Preset” if you intend to use some of the pre-
tuned channels.
1.
Select “INITIAL”.
or
To decide.
MENU
TIMER
SET
UP
B
INITIAL
Downloaded from: http://www.usersmanualguide.com/